How do you hang a neon sign?
Share
An LED neon sign from Neon Atelier is either screwed to the wall with four stand-off mounts or hung like a picture with the hanging kit. Both are included in the price; you choose in the configurator. All you need is a drill, a spirit level and 15 minutes; you do not need an electrician, as the sign has a plug-in power supply.
Option 1: stand-off mounts (the standard solution)
The acrylic panel has four pre-drilled holes in the corners. Stainless-steel stand-offs are screwed through them and hold the sign about 2 cm off the wall. It looks high-end, the light casts a soft glow onto the wall, and the cable disappears behind the sign.
- Hold the sign against the wall, level it with a spirit level and mark the four drilling points through the holes.
- Drill and fit wall plugs to suit the wall: 6 mm for masonry and concrete, cavity fixings for plasterboard, and drill without hammer action on tiles.
- Screw the stand-off bases tight, position the sign and screw in the caps from the front. Do not overtighten; the acrylic must not be under tension.
- Plug in the power supply, switch on and set the brightness with the remote control.
Option 2: hanging kit
Two small eyelets on the panel, a clear cord or a chain, and one or two hooks in the wall. Ideal for weddings and events, for a rented flat with just one drill hole, and for hanging in front of a window or on a flower wall. The sign hangs freely and can be taken down at any time.
Without drilling
For light signs up to about 60 cm, strong adhesive wall hooks or picture-hanging strips hold on smooth, grease-free surfaces. Tiles, glass and painted wood work well; woodchip wallpaper and plaster do not. For signs of 100 cm and above we always recommend screw mounting.
Cable and power supply
The clear cable on the sign is 2 m long; we make longer cables on request, just let us know when you order. Plan the socket in advance: the cable exits at a corner of the panel, usually bottom right or bottom left. The power supply should sit in the open, not behind fabric or inside closed furniture.
Frequently asked questions
Can I hang the sign in a rented flat?
Yes. With the hanging kit you need only one hook, and with adhesive hooks no hole at all.
Can the sign hang outdoors?
In covered outdoor areas such as a terrace or an entrance, yes, as the splash-proof version. Not unprotected in the rain.
How heavy is a neon sign?
A sign 100 cm wide weighs around 2–3 kg; two wall plugs carry that easily.
The detailed instructions for all sign types, including illuminated letters and light boxes, are in the guide How to install illuminated signs.